KOMPART
Compliance News & Product Updates

What's changing in fire compliance —
and what's new in KOMPART.

Plain-English updates on the rules that affect your buildings, plus every improvement we ship. Built for managing agents who'd rather read two minutes than miss something that matters.

Latest Updated 23 Jun 2026
Fire Doors · Reg 10

The fire-door check that catches most buildings out

If a building is over 11m, communal fire doors need checking every 3 months — not annually.

Under Regulation 10 of the Fire Safety (England) Regulations 2022, responsible persons for buildings above 11m must carry out quarterly checks of communal fire doors and annual checks of flat entrance doors (on a best-endeavours basis).

The common trap: treating fire-door inspection as a once-a-year job. For a six-storey block, that's four communal rounds a year, not one — and a missed quarter is a documented gap an enforcing officer or insurer can point to.

What to do: confirm your building heights, then put communal doors on a rolling quarterly cycle. KOMPART's calendar schedules these automatically from each inspection.

Compliance desk · 23 Jun 2026 · 2 min read
More from the compliance desk
Insurance

Why non-compliance quietly voids your buildings insurance

Cover is written on the condition the building is compliant. After a fire, the loss adjuster's first request is the paper trail — and if records can't be produced, insurers can reduce or decline the claim, exposing leaseholders and directors to reinstatement costs in the millions.
16 Jun 2026 · 2 min read
Building Safety Act

The "golden thread", explained for managing agents

You don't just need to be compliant — you need to prove it on demand, with dated records. Who inspected what, when, what they found, and what was done — retrievable in minutes. "We thought the contractor had it" is not a defence.
9 Jun 2026 · 2 min read
KOMPART watches every compliance cycle and sends the reminders
July 2026

Every deadline, chased automatically

Now that every compliance cycle is a faithful record of what's due, KOMPART works it for you. It watches every cycle and sends reminders on a fixed schedule ahead of each date — 90 days out, then 30, 7, on the day, and an escalation if it runs over — to the responsible person and the assigned contractor. The Calendar opens on an Upcoming Inspections panel showing what's next and the exact date each reminder will send, and every cycle carries its full reminder schedule with each notice marked as it goes out. The chasing that used to mean someone watching a diary now runs itself — and leaves a dated trail while it does.

Shipped
June 2026

Drop a report — KOMPART files it

Drop any compliance PDF — a fire door inspection, a compartmentation survey, an FRA, a certificate — and KOMPART reads it, works out which of your buildings it belongs to, the category, the report type and the date, then files it. You confirm in one click before anything is saved. No more picking building → category → type → date by hand.

Shipped
Enforcement-ready pack
June 2026

Enforcement-Ready Pack, rebuilt

Generate one bundled PDF per building — cover, regulatory basis, a contents index with per-report fingerprints, an integrity page, then every report merged in and stamped with a scannable, verifiable QR. Hand it to an insurer or enforcing officer as a single document.

Shipped
Every record under one tap
June 2026

Every record under one tap

The building view is now a clean set of compliance categories. Open one and you get a two-column audit trail — Inspections and Completion Reports, newest first — and any report opens inline with a download, no waiting. Resident doors drill down flat-by-flat.

Shipped
A calendar you can trust
June 2026

A calendar you can trust

Compliance cycles are now created only when a real inspection is submitted — nothing is hand-entered. Each cycle shows exactly why it exists and when, so the calendar is a faithful, tamper-evident mirror of what's actually been done on site.

Shipped